<HTML>In a message dated 5/1/20= 03 2:36:51 AM Pacific Daylight Time, wmaxim@sc.rr.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT= : 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Then when (with the wippen out)= I would move the jack through its range of motion, there was this "click" as the jack tip hit the stop felt, and again<= BR> as the jack returned to rest.  I have no idea why it would rattle in on= e situation and click in the other. </BLOCKQUOTE> The reason it rattled when played is because the jack came to an abrupt stop= before hitting the stop felt (which it's not supposed to hit during escapem= ent anyway) and the loose part kept moving freely.  The same idea of lo= ose parts making noise when the larger part they're attached to changes in m= otion lead my auto mechanic to the four bolts holding the underside of my va= n's engine in place.  One bolt had to be turned two full turns before b= ecoming tight!  Made a klunk every time I started from a stop or went o= ver a pothole. So the prize is a beer in Reunion Tower at Dallas, right? Lisa</HTML>