<HTML>In a message dated 10/19/01 7:33:38 AM Central Daylight Time, cedel@supernet.com writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">What I will do unless someone has a better idea:  Remove the sostenuto rod, then for each problem key loosen the damper wire and pull it out, remove the damper lever assembly and glue in the weight, then replace/regulate as needed.  I'm not eager to do this, since getting the flange screw back in has been a source of frustration for me in the past, but I can do it if that's the best way. Help?  Comments? Regards, Clyde Hollinger </BLOCKQUOTE> Clyde On a relatively new piano like this, and with the leads coming all the way out, your solutions is probably going to be the best one. On occasion, if the problem is with just one lead on one damper, I have been able to push the lead back into place with a screw driver, and then using that screwdriver, scribe a line on the edge of the lead, towards the flange. This was enough to distort the shape of the lead so that it will stick in there. It is not the perfect solution, but it got the job done without having to remove everything. Wim PS see you next weekend, roomy.</HTML>