<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html> <head> <META HTTP-EQUIV="Content-Type" CONTENT="text/html; = charset=us-ascii"> <meta name=Generator content="Microsoft Word 10 (filtered)"> <style>  </style> </head> <body bgcolor=white lang=EN-US link=blue vlink=blue> <div class=Section1> I have had success using gel type superglue and accelerator.  Paint the accelerator on the molding = and the glue on the felt.  Press for a few seconds, and it should = hold.  You can also use white glue instead of the accelerator, but you will have to = clamp it until the white glue is dry.  You won’t get the same tone = from the hammer as before it came unglued.  Better to replace the hammer = if possible.  Good luck,       =       Paul McCloud       =       San Diego   -----Original = Message----- From: = pianotech-bounces@ptg.org [mailto:pianotech-bounces@ptg.org] On Behalf Of Jack Houweling Sent: Monday, November = 10, 2003 9:15 PM To: Pianotech Subject: Fw: Hammer = glue   <div>   </div> <div> ----- Original Message = ----- <div style='font-color:black'> From:</span= > <a href="mailto:jackhouweling@dccnet.com" = title="jackhouweling@dccnet.com">Jack Houweling</a> </div> <div> To:<= /font> <a href="mailto:jackhouweling@dccnet.com" = title="jackhouweling@dccnet.com">jackhouweling@dccnet.com</a> </div> <div> Sent:</span= > Monday, November 10, 2003 9:12 PM </div> <div> Subject:</s= pan> Hammer = glue </div> </div> <div>   </div> <div> Hello </div> <div>   </div> <div>     I am = trying to glue this hammer felt back on and am having a problem with the = glue.  I have been trying a white glue and clamps but it does not hold. What = kind of glue recommended? </div> <div>   </div> <div> thanks, </div> <div> Jack = Houweling </div> <div>   </div> Your files are attached and ready to send = with this message. </div> </body> </html>