<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re: Drying down a panel</title></head><body> <div>David, Terry and other like minded heretics,</div> <div><br></div> <div>Thank you for your post Terry.</div> <div><br></div> <div>Images of our sound board panel conditioning box are included in the Photogallery section on our website. Direct links to the pages are below;</div> <div><br></div> <div>http://overspianos.com.au/drb1.html</div> <div><i>This page shows a view into the drying box through the loading door, and an outside view.</i></div> <div><br></div> <div>http://overspianos.com.au/drb2.html</div> <div><i>This page shows the drying box without the side panel or the fan box attached to the unit.</i></div> <div><br></div> <div>There is some explanatory text included on each page.</div> <div><br></div> <div>It takes some time to build the box, but you're young David, so you'll get many years of use out of it should you decide to take the plunge.</div> <div><br></div> <div>I received confirmation yesterday that the pianotech list can be a dangerous environment to co-exist in from time to time - feeling very singed I am.</div> <div><br></div> <div>Best,</div> <div>Ron O.</div> <div><br></div> <blockquote type="cite" cite>The only thing I can think of that would be fast would be something like the<br> hot box Ron Overs posted about a couple months ago. It had forced air<br> heating. Check the archives. In my hot box it usually take about one to two<br> weeks - I think there is a lot of insurance in that time frame - I think it<br> gets to about 90% of where it is going in just a few days.<br> <br> Terry Farrell<br> <br> ----- Original Message -----<br> From: "David Love" <davidlovepianos@earthlink.net><br> To: "Pianotech" <pianotech@ptg.org><br> Sent: Thursday, November 06, 2003 2:31 AM<br> Subject: Drying down a panel<br> <br> <br> > What's the fastest, safest way to dry down a panel to the desired EMC.<br> ><br> ><br> > David Love</blockquote> <blockquote type="cite" cite>> davidlovepianos@earthlink.net</blockquote> <div><br></div> <x-sigsep><pre>-- </pre></x-sigsep> <div><font face="Times New Roman" size="+1" color="#0000FF"><b>OVERS PIANOS - SYDNEY</b></font></div> <div><font color="#000000"><i>   </i></font><font color="#0000FF"><i>Grand Piano Manufacturers</i></font><font color="#000000"><br> _______________________</font></div> <div><font size="-2" color="#000000"><br> </font><font color="#000000">Web http://overspianos.com.au</font></div> <div><font color="#000000">mailto:info@overspianos.com.au<br> _______________________</font></div> </body> </html>