<HTML><HEAD></HEAD> <BODY> The pipe insulation sounds like a good idea.  Do run some material down the sides and clamp it on with the insulation?  What's with the "Ft. Stinkin' Desert"? David I.     ----- Original message ----------------------------------------> From: Nichols <<A href="mailto:nicho@lascruces.com">nicho@lascruces.com</A>> To: Pianotech <<A href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>> Received: Mon, 16 Sep 2002 10:50:20 -0600 Subject: Re: Piano Apron At 09:01 AM 9/13/2002 -0700, you wrote: <BLOCKQUOTE class=cite cite="" type="cite">Anybody know where can I get an apron for outside of the piano which is used to protect the outside of the case while I am working on the soundboard/plate etc..    Thanks   David Love</BLOCKQUOTE> David,     Auto parts stores have fender guards that are okay, but can be a problem with fresh finishes due to the vinyl or rubber backing. Consider flannel. For the top of the rim, I use the snap-on pipe insulation from hardware stores. Get the "higher" quality stuff, it lasts a long time and doesn't break into little pieces. Bigger is better. Guy Nichols, RPT Ft. Stinkin' Desert </BODY></HTML>