<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 7/14/01 11:47:02 AM Central Daylight Time,
<BR>mfarrel2@tampabay.rr.com writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">"I'd suggest pulling the piano out from the wall, find some padding such as
<BR>a
<BR>moving or other old blanket, tilt the piano back about 45 degrees with the
<BR>padding protecting the wall."
<BR>
<BR>I don't understand how this would help. It would make it difficult to get
<BR>at the tuning pin area and seem to me it would present a huge danger of it
<BR>falling. How does tilting the piano 45 degrees help?
<BR>
<BR>Terry Farrell
<BR></BLOCKQUOTE>
<BR>
<BR>Tilting the piano back 45 degrees against a wall, to me, doesn't make sense.
<BR>When I suggested titling the piano on it's back on a tilter, was to be able
<BR>to stand in back of the piano, so that the tuning pins are right in front of
<BR>you, just as you would be stringing a grand piano.
<BR>
<BR>Wim </FONT></HTML>