<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=content-type content=text/html;charset=US-ASCII> <META content="MSHTML 6.00.2716.2200" name=GENERATOR></HEAD> <BODY> <DIV>Hi Hazen -</DIV> <DIV> </DIV> <DIV>In my experience, the only way to get these bubbles to truly lay down = flat is to cut an "x" in the bubble, then glue it down with the glue of = your choice - CA works good.  Then use a filler like spot putty or bondo to= fill the cracks made by the "x", sand it smooth when dry, and recoat appropriately.</DIV> <DIV> </DIV> <DIV>Mark Potter</DIV> <DIV><A href="mailto:bases-loaded@juno.com">bases-loaded@juno.com</A></= DIV> <DIV> </DIV> <DIV> </DIV> <DIV>On Fri, 24 May 2002 22:09:07 EDT <A href="mailto:HazenBannister@cs.com">HazenBannister@cs.com</A> writes:</= DIV> <BLOCKQUOTE dir=ltr style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px; BORDER-LEFT: #000000 2px = solid"> <DIV><FONT face=arial,helvetica><FONT size=2>Hi list, <BR>I have a = Mehlin grand I'm rebuiding,refinishing for a customer.I had two or three coats = of black laquer on it ,and a few bubbles have come up in the middle of the lid.What is the best way of dealing with this? I thought of slicing it = with a razor,or maybe trying a syringe with glue in it. <BR>Thanks much, <BR>= Hazen Bannister</FONT> </FONT></DIV> <DIV> </DIV></BLOCKQUOTE></BODY></HTML>