<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1505" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Ohoh. Is this the one with the wood = rail with the stickers comming up through it?</FONT></DIV> <DIV><FONT face=Arial size=2>If it is you need 4 or 5 damper heads = drilled out to, I think it is 1/8 inch.</FONT></DIV> <DIV><FONT face=Arial size=2>You will capture the wire end of the = sticker at the end of each section.</FONT></DIV> <DIV><FONT face=Arial size=2>This one is easy but still look for the = brace. It may be a rod.</FONT></DIV> <DIV><FONT face=Arial size=2>Rough setting of lost motion can be = done by adjusting the hight of the sticker rail.</FONT></DIV> <DIV><FONT face=Arial size=2>You will want to purchase a 12" long = thin 1/8" screwdriver.</FONT></DIV> <DIV>Joe Goss RPT<BR>Mother Goose Tools<BR><A href="mailto:imatunr@srvinet.com">imatunr@srvinet.com</A><BR><A href="http://www.mothergoosetools.com">www.mothergoosetools.com</A></DI= V> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=richard.ucci@att.net href="mailto:richard.ucci@att.net">richard.ucci@att.net</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, August 03, = 2005 7:06 PM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> howard spinet</DIV> <DIV><BR></DIV> <DIV>Hi Guys,</DIV> <DIV>Came across a baldwin howard spinet with jack flanges that are = comming unglued. I want to pull the action, but it was designed in a way I = have yet to see.</DIV> <DIV>Bolted to the plate-no struts, and these long flat metal pieces = that are screwed into the wooden platform under the action.</DIV> <DIV>Anything I should be aware of other than the usual stuff? Also , = will the pianotek sticker holder work on this model?</DIV> <DIV>Thanks,</DIV> <DIV>RU/UP</DIV></BLOCKQUOTE></BODY></HTML>