<HTML>In a message dated 2/24/02 3:53:54 AM !!!First Boot!!!, Bigeartb@AOL.COM writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Wilem: I'm not sure what you mean by straightening out the sleeve. How do I do that? I think the tightness feels like metal to metal. Tommy Black Decatur, Ala. </BLOCKQUOTE> Tommy The damper wire goes through a sleeve that also holds the screw that you tighten to hold the wire. It can be turned, clockwise, or counter clockwise. However, in order to do that, you have to insert the screw, without the damper wire, and tighten it all the way. You have to look in the top of the flange to see if you can see where the hole for the damper wire is. Like I said, it's a little tricky. I would suggest, instead of trying to turn the sleeve, that you open the hole with a drill. That will be a lot easier. Wim </HTML>