<HTML><FONT FACE=arial,helvetica><FONT COLOR="#000000" FACE="Geneva" F=
AMILY="SANSSERIF" SIZE="2"><BR>
In a message dated 11/12/03 10:16:35 PM, Erwinspiano@aol.com writes:<BR>
<BR>
<BR>
<BLOCKQUOTE CITE STYLE="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; =
MARGIN-RIGHT: 0px; PADDING-LEFT: 5px" TYPE="CITE"></FONT><FONT COLOR="#0=
00000" FACE="Geneva" FAMILY="SANSSERIF" SIZE="2">after doing a mock up=
pre-stressing check of the bearing it had roughly 2 degrees of bearing in t=
he top 2 sections tapering down to 1&1/2 degrees in the tenor starting i=
n at the treble tenor break The bass was set almost to zero. It was really=
fairly text book S&S bearing set up.<BR>
</BLOCKQUOTE></FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSE=
RIF" SIZE="2"><BR>
<BR>
I'm very curious to know how you mock-up a stress on the board. Do you use w=
eights? I'm guessing you have the plate in to do this ?<BR>
Glenn C.</FONT><FONT COLOR="#000000" FACE="Geneva" FAMILY="SANSSERIF" =
SIZE="2"></FONT></HTML>