<html>
<body>
I'm surprised that no one has mentioned the possibility of the buzz<br>
being a bass sting winding being slightly loose. I've heard that <br>
many times. <br><br>
Avery <br><br>
At 11:34 PM 6/13/04, you wrote:<br>
<blockquote type=cite class=cite cite><b>If you can get the buzz to go
away, by pressing the pin with a screwdriver, it is probably a loose
pin.<br>
Get out your bottle of C/A glue, and apply.<br>
I have never seen a 9lb sledge, but that probably would be a bit too
heavy. :-)<br>
Regards,<br>
</b>John M. Ross<br>
Windsor, Nova Scotia, Canada<br>
<a href="mailto:jrpiano@win.eastlink.ca">jrpiano@win.eastlink.ca</a><br>
<dl>
<dd>----- Original Message ----- <br>
<dd>From:</b> <a href="mailto:Piannerman@aol.com">Piannerman@aol.com</a>
<br>
<dd>To:</b> <a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a> <br>
<dd>Sent:</b> Monday, June 14, 2004 1:10 AM<br>
<dd>Subject:</b> Dang buzzy string<br><br>
<dd>Dear People,<br>
<dd> I have this piano at a church, its a Kawai grand, 20 yrs. old, about 6.5'. It has a note in the midrange that has a barely audible buzzing. I whacked (lightly) the bridge pin(s) with a hammer (a small one) and the buzzing stopped. But it came back in a day or two.<br>
<dd> <br>
<dd> Do you think this is a loose bridge pin? Is the fix to get a bigger hammer? I can go up to a 9 lb. sledge. Or do I need to pull the pins out and epoxy back in? Any chance it could be something other than a pin? Like the bridge itself is loose?<br>
<dd> <br>
<dd> As always, I appreciate very much any constructive comments. Thanks in advance.<br>
<dd> <br>
<dd>Charles Cron<br>
<dd>Nashville Associate<br>
</dl></blockquote></body>
</html>