<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=content-type content=text/html;charset=US-ASCII> <META content="MSHTML 6.00.2730.1700" name=GENERATOR></HEAD> <BODY> <DIV>Hi Tom -</DIV> <DIV> </DIV> <DIV>If I read this correctly, I just replaced both "axles" on a fallboard = two weeks ago that were missing on a Bradbury.  (Ron N, did some great re-scaling for me on this one, by the way!)  For replacements, I used = wood screws, found that a #8 had the right size shank to fit nicely into the = hardware provided, sawed the heads off of the screws, and cut slots in the ends of = their shanks for screwing in to the fallboard.  Worked great, and was = probably a total of 20-30 minutes work.  Do make sure you repair the fallboard = end where the screw enters, as the original one likely escaped from being too = loose due to damaged end grain wood.  I used West Systems epoxy.</DIV> <DIV> </DIV> <DIV>Mark</DIV> <DIV> </DIV> <DIV>On Sun, 5 Oct 2003 19:50:51 EDT <A href="mailto:Tvak@aol.com">Tvak@aol.com</A> writes:</DIV> <BLOCKQUOTE dir=ltr style="PADDING-LEFT: 10px; MARGIN-LEFT: 10px; BORDER-LEFT: #000000 2px = solid"> <DIV><FONT face=arial,helvetica><FONT face=Geneva color=#000000 = size=2 FAMILY="SANSSERIF">List<BR><BR>Are Tokai pianos made by Samick?  = The model number G155 is reminiscent of Samick model numbers...<BR><BR>I ask= because I need to find a replacement part for the fallboard.  The = little axle that fits into the slot in the case is missing on one side and = Schaff doesn't have anything that matches.  (At least I couldn't find = anything in the catalog.)<BR><BR>Any advice on finding this part will be appreciated.<BR><BR>Tom Sivak</FONT><FONT face=Geneva color=#000000 = size=2 FAMILY="SANSSERIF"></FONT> </FONT></DIV> <DIV> </DIV></BLOCKQUOTE></BODY></HTML>