<html> Hi Marcel,                   The big Heintzman decals were always a hassle for me, especially the plate decal. A secret I learned. Follow the instructions, with one small difference. After using the Decal glue and getting the decal on with no air bubbles under it.   Leave it alone for a few hours to dry and adhere before wetting the backing paper, and it will just slide off without the decal moving with the paper. These decals are a fraction of the price of the decals unlimited,In the case of heintman with 3 large dedcals, you save about $100 Cnd. Regards Roger. At 10:30 PM 3/1/02 -0500, you wrote: >Hi, > >Is there a foolproof way to install soundboard and fallboard decals. I had 2 >to install today, and, as usual, I needed 4 of them to make a "relatively" >decent one... I used the glue that Pianophile supplied with the decals and >tried to follow the instructions. The letters curled up and teared on the >first two. Is it because I'm not waiting long enough? How do you guys do it? >Do you use laquer? varnish? or schellac? > >Please, give me some pointers so I can avoid the decal blues next time. > >Thanks in advance, > >Marcel Carey, RPT >Sherbrooke, QC >--- >Outgoing mail is certified Virus Free. >Checked by AVG anti-virus system (<a href="http://www.grisoft.com/" eudora="autourl">http://www.grisoft.com</a>). >Version: 6.0.311 / Virus Database: 172 - Release Date: 01-12-27 > </html>