<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1458" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; = FONT-FAMILY: Arial" bottomMargin=7 bgColor=#ffffff leftMargin=7 topMargin=7 = rightMargin=7> <DIV> </DIV> <DIV> </DIV> <DIV>Here's the set up.  I use the vortec to keep the bit = cool.  Tilt can be done by putting a suitable dowel under the front or rear of the = sliding drill mount.  The left and right movement is by sliding the = drill.  The fore and aft is the towels under the ends of the track.  I = suppose it could be used on an upright but I haven't done it yet.</DIV> <DIV> </DIV> <DIV>Next time I use it I will do the two pass method to prevent = lifting of the drill for better accuracy.</DIV> <DIV> </DIV> <DIV>Carl Meyer Ptg assoc<BR>Santa Clara, Ca.</DIV> <DIV> </DIV> <DIV> </DIV> <DIV> </DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=rsnelson0984@mchsi.com = href="mailto:rsnelson0984@mchsi.com">Richard Oliver Snelson</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">Pianotech</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, November 15, 2004 = 10:59 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Pinblock drill = picture. </DIV> <DIV><BR></DIV> <DIV><FONT face="Times New Roman" size=3>Yes it is Dale. I'll set = it up latter this week and get pictures. I use an old grand keybed across the top = of the piano for the drill to set on. I have the plate out on this piano so = can't show bit extension, but you will get the idea. I use the longer bits = that Pianoteck has for sale and reach is not a problem. The drill and motor = are free (you can adjust) to pivot around a center post. The base can be = adjusted for a lot more angle (tilt) than one would want. More later. = Rich</FONT></DIV> <DIV>Richard Oliver Snelson<BR></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; = BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV> <DIV style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: = black"><B>From:</B> <A title=Erwinspiano@aol.com href="mailto:Erwinspiano@aol.com">Erwinspiano@aol.com</A> </DIV> <DIV style="FONT: 10pt arial"><B>To:</B> <A = title=pianotech@ptg.org href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV> <DIV style="FONT: 10pt arial"><B>Sent:</B> Monday, November 15, = 2004 8:47 AM</DIV> <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Pinblock drill = picture. </DIV> <DIV><BR></DIV><FONT id=role_document face=Arial color=#000000 = size=2> <DIV> <DIV><FONT size=3>   Hi Richard</FONT></DIV> <DIV><FONT size=3>  Is this a drill the block in the piano = set up? If so pleas show this if possible<BR>     Dale E.</FONT></DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px = solid"><FONT style="BACKGROUND-COLOR: transparent" face=Arial = color=#000000 size=2>I'll take a couple more with a different camera and send them directly = to <BR>you. Jeannie wants them for the journal also. The mount is a = little more <BR>complex than the picture show as the drill post has been = inverted and sits <BR>on a piviot post attached to the base. I want to also = tell the source of the <BR>drill chuck extension which comes from = Garrett Wade. Rich<BR><BR>Richard Oliver Snelson</FONT></BLOCKQUOTE></DIV> <DIV></DIV> <DIV> </DIV></BLOCKQUOTE></BLOCKQUOTE></FONT></BODY></HTML>