<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 FAMILY="SANSSERIF" FACE=
="Arial" LANG="0">Michael Spalding wrote:<BR>
>Is there a tool I don't own yet, for adjusting let-off screws with <BR>
>low overhead<BR>
>clearance?</BLOCKQUOTE></FONT><FONT COLOR="#000000" style="BACKGROU=
ND-COLOR: #ffffff" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0"><=
BR>
<BR>
</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2=
FAMILY="SANSSERIF" FACE="Arial" LANG="0">Bill Ballard replied:</FONT>=
<FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2 FAMILY=
="SANSSERIF" FACE="Arial" LANG="0"><BR>
</FONT><FONT COLOR="#000000" style="BACKGROUND-COLOR: #ffffff" SIZE=2=
FAMILY="SANSSERIF" FACE="Arial" LANG="0"><BR>
<BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT=
: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px"><BR>
A hemostat. Not only can it clamp onto the body of the screw and turn <BR>
it, it can poke through the eye for about 30º of turn (depending on <BR>
which way the eye is facing) or it can grab "across" the eye for <BR>
about 90º of turn (again depending on eye orientation).<BR>
</BLOCKQUOTE><BR>
<BR>
And I like the small pair of needle-nose pliers which I always carry anyway.=
Better leverage than the hemostat (actually I mean worse leverage - less ha=
nd movement per jaw mvmt) and I can use either one jaw or two to insert in t=
he eye, depending.<BR>
Bob D</FONT></HTML>