<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1226" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hey guys,</FONT></DIV>
<DIV><FONT face=Arial size=2>Have a problem. I have three =
broken pedals
off of two uprights. One is a Grinnell console built in the =
mid-40's with
two pedals. Both have been broken about 1'' behind the horn. =
The
length of the pedals are 8 1/2" with 5 1/8" from horn to center of =
pin.
The other is an old upright, the right pedal broken just behind the =
horn.
Dimensions; 9 1/2" long; 5 9/16" from horn to center of pin. =
All
three pedals have been brazed or welded. What's the chance that =
they can
be repaired and how difficult is it to weld/braze =
them? What
about replacing with new pedals? None in Schaff fit the dimensions =
of
either size pedal.</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Any ideas?</FONT></DIV>
<DIV><FONT face=Arial size=2>Joy!</FONT></DIV>
<DIV><FONT face=Arial size=2>Elwood</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Elwood Doss, Jr. RPT</FONT></DIV>
<DIV><FONT face=Arial size=2>Piano Technician/Technical =
Director</FONT></DIV>
<DIV><FONT face=Arial size=2>106 Fine Arts Building</FONT></DIV>
<DIV><FONT face=Arial size=2>University of Tennessee at =
Martin</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV></BODY></HTML>