<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR></HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Well, Rob:&nbsp; I could never =
understand why
anyone would drink lite beer.&nbsp; I guess you don't want to get drunk, =
you
just like to piss alot.</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Cheers;</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV><FONT face=Arial size=2>Carl Meyer</FONT></DIV>
<DIV>&nbsp;</DIV>
<DIV>&nbsp;</DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
  <A href="mailto:rrg@nevada.edu" title=rrg@nevada.edu>Robert =
Goodale</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
  title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Wednesday, April 18, 2001 =
8:01
  AM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Kimball touch =
weight</DIV>
  <DIV><BR></DIV>It sounds like Abel Lights would probably be =
appropriate on
  this piano if you are interested in preserving the original =
design.&nbsp; (I
  prefer Bud Light but I'll take whatever I can get).&nbsp; If the piano =
is
  excessively light, however, normal Abel hammers would certainly bring =
the
  weight up and may be a better choice.&nbsp; As far as relocating the =
key
  leads, be sure to plug the original lead holes first.&nbsp; Failure to =
due so
  would cause a weak area in the key which would then be susceptible to
  breaking.&nbsp; Also, it is important to use the same type of wood, =
(i.e.
  spruce or whatever), and line up the grain in the same direction as =
the
  original.&nbsp; This will insure a consistent expansion rate during =
humidity
  increases and minimize the risk of splitting the surrounding key =
wood.&nbsp;
  Use a plug cutter in a drill press to manufacture new plugs.&nbsp; In =
the past
  I have made plugs by cutting them from a set of old keys from a junk
  piano.&nbsp; This way they were about the same age and quality.
  <P>Rob Goodale, RPT <BR>Las Vegas, NV <BR><BR><BR><BR>
  <P>Paul wrote:
  <BLOCKQUOTE TYPE="CITE">
    <STYLE></STYLE>
    <FONT face=Arial><FONT size=-1>List</FONT></FONT>&nbsp;<FONT
    face=Arial><FONT size=-1>I'm replacing the hammers on a Kimball =
player grand
    about 5'2". I chose the Abel lights mainly because of the success =
I've had
    with them in the past on other small grands. The action is the old =
Thayer
    style. The wippens have no rep. spring adjustment screw. The touch =
weight
    with the original hammers averaged 30g down and 10g up. The new =
hammers as
    sampled almost eliminate the down weight. Talk about light! The =
action has
    been gone through and new key bushings installed. Friction/pinning =
done.The
    keys have 4 to 5 1/2 oz weights in front of the balance rail. I know =
I'm in
    for a touch weight project, but I can't spend a lot of time at this. =
The
    money situation is very tight. The piano is a gift and the children =
are
    interested in piano. A quick fix is out of the question. I was =
wondering if
    anyone has a trick or two for just removing the original key leads =
and
    moving them to get this thing to work. I'd like to end up with a =
touch
    weight of about 45g. Does this sound =
reasonable?</FONT></FONT>&nbsp;<FONT
    face=Arial><FONT size=-1>Paul
Chick</FONT></FONT></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>