<html>
<body>
<font size=3>Xavier,<br><br>
The distances between the holes is determined by the string
spacing. It is different for every piano design.<br><br>
You should duplicate the old rail spacing, or make a scale stick of the
strings at the strike point.<br><br>
Don Mannino RPT<br><br>
At 02:09 PM 3/29/2004, you wrote:<br>
<blockquote type=cite class=cite cite>Ok. sorry, the little hole in the
action rail were they are placed wippen, hammer and dampers
.....wath is the distance between hole in m.m. or c.m. ? in
upright...of course. I am a piano technician from guayaquil ecuador, and
I make big work in old pianos, pinblock ....replacement, and
more.....but the hole in the action rail is headache for my...85
hole for the hammer.....back 85 for the wippen and the hole for the
damper.<br><br>
<a href="http://www.latinmail.com/" eudora="autourl">http://www.latinmai=
l.com</a>
- La forma más cómoda de enviar y recibir tus=
e-mails_______________________________________________<br>
pianotech list info: <a href="http://www.ptg.org/mailman/listinfo/pianotec=
h"=
eudora="autourl">https://www.moypiano.com/resources/#archives</a></font>=
</blockquote></body>
</html>