<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
Aslo... I would be interested in knowing the depth of the keystick
... top of the key (throw out any raise keybutton) to botom at the balance
pin hole.
<p>Richard Brekne wrote:
<blockquote TYPE=CITE>Just to make sure I'm on the same page here...
<p>Your center rail to capstan, magnet and keytop are taken as in the following
<br>example
<p>Top of the key front minus 10 mm to bottom of key at center of the balance
rail
<br>pin hole ?
<p>Thanks..
<br><a href="https://www.moypiano.com/resources/#archives"></a> </blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>UiB, Bergen, Norway
<br><A HREF="mailto:rbrekne@broadpark.no">mailto:rbrekne@broadpark.no</A>
<br><A HREF="http://home.broadpark.no/~rbrekne/ricmain.html">http://home.broadpark.no/~rbrekne/ricmain.html</A>
<br><A HREF="http://www.hf.uib.no/grieg/personer/cv_RB.html">http://www.hf.uib.no/grieg/personer/cv_RB.html</A>
<br> </html>