<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1">
<title></title>
</head>
<body text="#000000" bgcolor="#ccccff">
Hello Ed,<br>
<br>
I carry small size German tuning pins for vintage pianos. They come in
.260, .266, and .272" <br>
Check out <br>
<a class="moz-txt-link-freetext" href="http://www.pianofortesupply.com/bridgetuningpins.html">http://www.pianofortesupply.com/bridgetuningpins.html</a><br>
<br>
Jurgen Goering<br>
Piano Forte Supply<br>
<a class="moz-txt-link-abbreviated" href="http://www.pianofortesupply.com">www.pianofortesupply.com</a><br>
"we've got the good stuff"<br>
<br>
<pre wrap="">Ed Foote RPT wrote:</pre>
<blockquote type="cite"
cite="mid200505311438.j4VEc1Y23188@bridget.rudoff.com">
<pre wrap="">..... The piano was strung with atypical tuning pins, (at least, in my
experience). They are .250" diameter and only 2 inches long. These are smaller than
any piano pins I know of, and larger than the zither/harpsichord pins. The
dainty little plate doesn't encourage me to drill the holes out to accomodate
the 1/0 pins, and they are all too long,anyhow. I can only imagine re-using
the originals. There was marginal torque on quite a few of them prior to
disassembly, so I want to treat the block before driving them back. </pre>
</blockquote>
</body>
</html>