<html>
<font size=3><br>
Drill a hole in 1/4" brass rod (or whatever fits your soldering
iron)<br>
Insert the reamer<br>
Secure with a pin driven into the inside of the reamer.<br>
<br>
I presume that you are trying to make a heated reamer from an umbrella
stave.<br>
</font><br>
Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jonpage@mediaone.net" eudora="autourl">mailto:jonpage@mediaone.net</a><br>
<font size=3><a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com<br>
</a></font>~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</html>