<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=US-ASCII"> <META content="MSHTML 6.00.2900.2802" name=GENERATOR></HEAD> <BODY id=role_body style="FONT-SIZE: 10pt; COLOR: #000000; FONT-FAMILY: = Arial" bottomMargin=7 leftMargin=7 topMargin=7 rightMargin=7><FONT id=rol= e_document face=Arial color=#000000 size=2> <DIV> <DIV><FONT size=3>     Steve</FONT></DIV> <DIV><FONT size=3>  If there is access enough then it is a simple mat= ter to drill a pilot hole for dry wall screws thru the board from the back of the p= iano  & into the soundboard liner. Get some glue into the joint any way possible & then screw it down.  The screws are the clamp.</FONT></D= IV> <DIV><FONT size=3>  Dale Erwin</FONT></DIV> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: blue 2px solid"><= FONT style="BACKGROUND-COLOR: transparent" face=Arial color=#000000 size= =2>I have a customer with a studio piano where the top of the soundboard has <BR>come unglued from the back frame.It seems to be only in the middle of the <BR>soundboard. You can only get to this area from the back of the piano. = Are <BR>there any good repairs for this? I have heard of using screweyes in th= e back <BR>and running screws through them into the soundboard to pull the soundboard <BR>back in place while the glue dries. I have never done this = and just wondered <BR>if it works? Any information will be helpful.<BR>   Thanks, Steve Sandstrom</FONT></BLOCKQUOTE></DIV> <DIV></DIV> <DIV> </DIV></FONT></BODY></HTML>