<html>
<!-- BEGIN WEBMAIL STATIONERY -->
<head></head>
<body>
<!-- WEBMAIL STATIONERY noneset -->
<DIV></DIV>
<P>Thanks Bill,</P>
<P>I don't think changing out the damper felts is an option. The dealer won't spring for it , and I doubt that Yamaha will either, and the client surely wont. I think I'm going to go for cutting down the lift .</P>
<P> </P>
<P>Thanks,</P>
<P>RU/UP <BR></P>
<BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message from "William R. Monroe" <pianotech@a440piano.net>: -------------- <BR><BR><BR>> Well, Rick, <BR>> <BR>> I must say I would be inclined to concur with the pedal being excessively <BR>> "thumpy." I just serviced a Yamaha C1 today. The thump of the dampers was <BR>> really quite bothersome. No amount of limiting the damper travel would do <BR>> anything here. The felts are in quite good condition, but are a bit firmer <BR>> than I usually see. <BR>> <BR>> My gut is that to make the thumping end, you'll need new (different) damper <BR>> felts. In my case, it is definitely the damper felts creating the noise, <BR>> but I would check to see what kind of shape the felts in the pedal box are <BR>> in and how absorbent they are. I often find poor felts in the pedal box can <BR>> contribute to that thumping noise. <BR>> <BR>> Hope you are able to remedy the problem. <BR>> <BR>> Regards, <BR>> William R. Monroe <BR>> <BR>> <BR>> <BR>> <BR>> ----- Original Message ----- <BR>> From: "Horace Greeley" <HGREELEY@STANFORD.EDU><BR>> To: "An open list for piano technicians" <PIANOTECH@PTG.ORG><BR>> Sent: Wednesday, January 11, 2006 8:31 PM <BR>> Subject: Re: thumping dampers <BR>> <BR>> <BR>> > <BR>> > Rick, <BR>> > <BR>> > Putting aside for the moment the "why bother?" that immediately <BR>> > springs to mind when recording with an instrument like this is <BR>> > mentioned, I generally agree with Dale. Nothing is going to stop <BR>> > noise from the assembly when the foot is simply lifted quickly off the <BR>> pedal. <BR>> > <BR>> > What you might also find helpful is to replace some/most of the <BR>> > harder felt and leather stop-blocks in the damper mechanism. It <BR>> > won't fix the whole problem - and - it definitely means that you will <BR>> > be revisiting the instrument to replace the softer material which <BR>> > wears out much more quickly, it might help. <BR>> > <BR>> > Hope there is something of value for you here. <BR>> > <BR>> > Best. <BR>> > <BR>> > Horace <BR>> > <BR>> > <BR>> > At 06:12 PM 1/11/2006, you wrote: <BR>> > > Ahh yes but it could be his pedaling technique. I've seen some <BR>> > > fine pianist with horrible pedal technique. They can make a <BR>> > > nominally set of of quit dampers start to sound like a bass drum <BR>> > > specially on a Steinway..which they're not used to. He probably <BR>> > > doesn't need a spring surgery but quite possibly his technique <BR>> > > needs attention....... JMO <BR>> > > <BR>> > > Dale <BR>> > >Hi Listers, <BR>> > > <BR>> > >Client with a new Yamaha ga-1 is complaining that the dampers make a <BR>> > >thumping noise when his foot is taken off the sustain pedal. He is <BR>> > >doing some recording and it is very noticable to him. Other than <BR>> > >changing the spring to one with less tension , what would be a <BR>> > >solution to his problem? <BR>> > > <BR>> > >Thanks, <BR>> > >Rick Ucci/Ucci Piano <BR>> > > <BR>> > > <BR>> > <BR>> > <BR>> > +++++++++++++++++++++++++++++++ <BR>> > Horace Greeley <BR>> > Systems Group <BR>> > Controller's Office <BR>> > Stanford University <BR>> > <BR>> > 651 Serra St., RM 100 <BR>> > Stanford, CA 94305 <BR>> > <BR>> > voice: 650.725.9062 <BR>> > fax: 650.725.8014 <BR>> > ++++++++++++++++++++++++++++++++ <BR>> > <BR>> > <BR>> <BR>> <BR>> _______________________________________________ <BR>> Pianotech list info: https://www.moypiano.com/resources/#archives </BLOCKQUOTE>
<!-- END WEBMAIL STATIONERY -->
</body>
</html>