<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=windows-1252">
<META content="MSHTML 5.50.4134.600" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>List,</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>I am attempting to rebuild a 1920's 5' George Steck =
that is
missing all sostenuto linkage between the pedal rod and =
pitman. I'm
unable to find replacement parts or pictures of the original =
replacement.
(Thanks to you all who looked for me a while back.) So. . . it =
appears
that I need to design some parts. Being a novice yet, I have a few =
questions:</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>1. What kind of pin should be used? what =
diameter? should it be plated? (I can't find anything =
in parts
catalogs.)</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>2. What kind and size of felt is generally =
used in the
bushings and what is the relationship of hole diameter in the block =
versus the
pin diameter and felt thickness?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>3: Any thoughts on the spring rate of =
compression spring
to be used? Any good sources to purchase these?</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Sorry if these questions are too basic. =
If you have
other thoughts or concerns I'll be happy to get them. Thanks
all.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>Mark Ultsch</FONT></DIV>
<DIV><FONT size=2>Madison WI</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2></FONT> </DIV></BODY></HTML>