<!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <body bgcolor="#FFFFFF"> Phil, If my memory serves me correctly, most consoles have dampers up to and including E6.  Some will go several notes further.  I think I found one vertical piano that damped as high as B6, but I can't say for sure. If the damper liftrod goes the full length of the action, I suppose you could add some spoons, drill some holes and add more damper lever assemblies.  But from your description I'm wondering if the problem isn't just the longer reverberation in a very live room.  In that case, find ways to cut the reverberation time or learn to accept it the way it is. Regards, Clyde Phil Ryan wrote: <blockquote TYPE=CITE>I had a customer complain that the upper notes on his new console piano above where the dampers leave off, rang out for too long.  It was a good quality piano in a very live room.  I agreed with him, and after tuning and cleaning up the unisons, it did sound a little better, but it still rang excessively, in my opinion.  What is the criteria for cutoff of dampers in the treble?  Can anything be done to mute this objectional ringing? Phil RyanMiami Beach, FL</blockquote> </body> </html>