<html>
At 11:38 AM 02/09/99 -0500, you wrote: <br>
<font face="arial" size=2><blockquote type=cite cite>I have a customer w/
a Lyon & Healy baby grand. It is need of one hammer
flange. I looked through the Schaff catalog but wasn's able to
match up the part I needed. Any suggestions on finding one that
will work are appreciated. Thanks.</font><br>
</blockquote><br>
<font size=3>Hi Jeremy,<br>
If you do quite a bit of grand work, I can highly recommend a renner
sample parts kit.<br>
If the worst comes to the worst, they have some universal flanges that
you can cut a piece off the tail to make fit. At least you will end up
with correct centre pin to flange screw geometry.<br>
Roger</font><br>
<div>Roger Jolly</div>
<div>Baldwin Yamaha Piano Centre</div>
<div>Saskatoon and Regina</div>
<div>Saskatchewan, Canada.</div>
<div>306-665-0213</div>
Fax 652-0505
</html>