<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; charset=iso-8859-1">
<META content="MSHTML 6.00.2600.0" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>Hazen: I have had good results with thin CA 
glue.&nbsp; For an upright you will have to lay the piano back on a tilter, then 
use about an entire bottle of glue, dribbling it in around the base of the pins 
until the glue stops going in - or you use up the bottle! Let it sit over night, 
then tune away. I have several clients with very elderly pianos&nbsp;for 
which&nbsp;this treatment has given the owners a few more years of life.&nbsp; 
Of course, it doesn't do anything for the worn out action, cracked soundboard, 
and alligator hide finish.......</FONT></DIV>
<DIV><FONT face=Arial size=2>Patrick Poulson, RPT</FONT></DIV>
<BLOCKQUOTE 
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV 
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: black"><B>From:</B> 
  <A title=HazenBannister@cs.com 
  href="mailto:HazenBannister@cs.com">HazenBannister@cs.com</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A title=pianotech@ptg.org 
  href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Tuesday, December 11, 2001 4:28 
  PM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> loose-pins</DIV>
  <DIV><BR></DIV><FONT face=arial,helvetica><FONT size=2>Hi list, <BR>&nbsp;I 
  have to go to a new customer friday,with an old upright.He said he thinks it 
  has some loose pins.I have used the pin tightener from Schaff, also have used 
  over-sized pins, and have used sandpaper bushing ,as well as driving the 
  pins.I was looking for <BR>maybe a new,or better idea.I have read about CA 
  glue in the journal,and wondered what kinda results some of you may have had 
  with it loose tuning pins.Also what <BR>kind of time are you looking at before 
  tuning,after using this method. <BR><BR>Thanks much, <BR>Hazen Bannister 
  <BR>Western Carolinas Chapter</FONT> </FONT></BLOCKQUOTE></BODY></HTML>