<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 5.50.4134.100" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Ok, I put new nuts and screws on and it = still is wobbly though not as much. When I shake it, it sounds as if there is a = rod loose in one of the posts. Being a H style leg, am I going to find = a couple of nuts to tighten if I remove the leg? The owner  thought they = were smooth on top when off. Or maybe there's a tensioner nut under the caster? = There are  rectangular blocks with one rounded corner, one per leg, = attached to the bottom of the case that pivot about a screw and wedge the leg = against the studs. Is that just an installation/removal aid? Doesn't seem to = have much of a purpose after tightening up the nuts. They were  5/16" studs.</FONT></DIV> <DIV><FONT face=Arial size=2>And Bob, did the Estey you saw have = nice lyre support rods?</FONT></DIV> <DIV><FONT face=Arial size=2>Keith R.</FONT></DIV></BODY></HTML>