<HTML><FONT FACE=arial,helvetica><FONT SIZE=2 PTSIZE=10>In a message =
dated 1/14/04 3:42:42 PM Pacific Standard Time, joegarrett@earthlink.net wri=
tes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-=
LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Are we talking about a Bras=
s Rail? Or, are we talking about Billings
<BR>Flanges? I suspect the later, as it's impossible to "move some from the
<BR>extremes, to replace the broken ones", with a brass rail. Clarification
<BR>would be nice.</FONT><FONT COLOR="#000000" BACK="#ffffff" style="=
BACKGROUND-COLOR: #ffffff" SIZE=3 PTSIZE=12 FAMILY="SANSSERIF" FACE=
="Arial" LANG="0"></BLOCKQUOTE>
<BR></FONT><FONT COLOR="#000000" BACK="#ffffff" style="BACKGROUND-COL=
OR: #ffffff" SIZE=2 PTSIZE=10 FAMILY="SANSSERIF" FACE="Arial" LANG=
="0">
<BR>Joe,
<BR>
<BR>They are not Billings Flanges. It is a brass rail set-up, but ther=
e are little removable tongues that have a groove for the pin that come off.=
I do not have one in front of me, and the ability to describe it elud=
es my aging brain. What happens is the hammer pin drops down between t=
he tongue, which is removable, and the rail. The tongue has a flat sid=
e with a slot for the pin, and a round back where the screw goes through. &n=
bsp;Can't remember for certain which side the screw goes through, but I thin=
k they come in from the back of the rail.
<BR>
<BR>I have seen brass flanges many times, but not one like these. Time=
to get a digital camera.
<BR>
<BR>Thanks,
<BR>
<BR>Dave
<BR></FONT></HTML>