<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 09/19/2001 1:10:03 PM Central Daylight Time, MERRILLPIANO@AOL.COM writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">List:
<BR>
<BR>The noise of the action parts settling after releasing the keys on a client's 1978 Baldwin R is more noticeable the last few years after it was moved to the desert in Grand Junction from Florida. I noticed the same thing on my 1970 Yamaha G3 after moving here from San Francisco. The back rail felt on the Baldwin looks pretty compressed compared to the ends that are not receiving the blows from the key ends. On the Yamaha, the back rail felt still seems pretty cushy and I think a lot of the noise is from the knuckles bouncing/hitting on the rep lever. Hammer flange friction on both pianos is 4-7 swings, so those aren't rattling I don't think.
<BR>
<BR>Any thoughts and experience others have on trying to quiet actions would be appreciated. Once knuckles get hard, can they be softened? How? Does replacing back rail felts help much?
<BR>
<BR>Come to think of it, I also have a client with a brand new 6'1" Kohler/Campbell(Samick) that makes a big racket when releasing the keys, and a Baldwin M at the college and ..... :)
<BR>
<BR>Thanks!
<BR>
<BR>Tom Merrill, Associate
<BR>Grand Junction, CO</FONT><FONT COLOR="#000000" SIZE=3 FAMILY="SANSSERIF" FACE="arial" LANG="0"> </XMP></FONT><FONT COLOR="#0f0f0f" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>
<BR>
<BR></BLOCKQUOTE>
<BR></FONT></FONT><FONT COLOR="#000000" SIZE=2 FAMILY="SANSSERIF" FACE="Arial" LANG="0">
<BR>Tom, I have found the number one cause of noisy actions after releasing the keys to be the capstan felts, I just replace them. The back rail felt can be packed but doesn't usually make to much noise. Also when going to a dry climate it can be good to check how well the key frame is bedded.
<BR>David Koelzer
<BR>DFW</FONT></HTML>