<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
There you go Terry!!!! Good for you!!! We can share ideas and see what
happens. When are you gonna start? Soon? What are your ideas for attaining
the crown? Are you gonna rib crown or .... the <i>other</i> way? :-] What
will you do to glue in the ribs? will you float the bass? will you taper
the board? How much and where? What kind of piano will be the guinea pig?
What else are you doing to this piano? Do I remember it being an upright?
Will you be replacing the pin block? More info!!! I want MORE INFO :-]
!!!!
<p>Greg
<br>
<p>Farrell wrote:
<blockquote TYPE=CITE>Ron, do you happen to know what month/year this article
appears? I have the
<br>Journal on CD, but have never been able to get the darn search thingee
to
<br>work worth anything. Thanks.
<p>I was originally planning on doing a "board-in-the-box" for my first
<br>soundboard, but after seeing how bold and daring Greg Newell is being,
I
<br>thought about it a bit more and figure that building a few rib-to-board
<br>clamps would not really be any more difficult than a building a big
strong
<br>box to ship soundboards back and forth across the continent - and they
would
<br>store much easier also!
<p>Terry Farrell
<p>----- Original Message -----
<br>From: "Ron Nossaman" <RNossaman@KSCABLE.com>
<br>To: <pianotech@ptg.org>
<br>Sent: Friday, January 11, 2002 10:20 AM
<br>Subject: Re: my own Soundboard
<p>SNIP
<p>> For gluing ribs to panels, I like pneumatic clamps similar to those
shown
<br>> in Claire Davies' PTJ article.
<p>SNIP
<br>>
<br>> Ron N</blockquote>
<p>--
<br>Greg Newell
<br><A HREF="mailto:gnewell@ameritech.net">mailto:gnewell@ameritech.net</A>
<br> </html>