<HTML> <HEAD> <TITLE>Re: Journal Tech Tip was Re: Tuning pin sleeves.</TITLE> </HEAD> <BODY> This fix has already been in the Journal.  See page 14 of the Jan 1992= issue.  There is also a good fix of a similar but different nature in = the Jan 1995 issue, page 10.  Check it out. Ted Simmons Merritt Island, FL <BLOCKQUOTE> From: Wimblees@AOL.COM Reply-To: pianotech@ptg.org Date: Sun, 24 Jun 2001 15:06:44 EDT To: pianotech@ptg.org Subject: Journal Tech Tip was Re: Tuning pin sleeves. </BLOCKQUOTE> <BLOCKQUOTE>In a message dated 6/22/01 11:45:46 PM Central D= aylight Time, nbarrett@midsouth.rr.com writes: <BLOCKQUOTE>Another use for these sleeves is to repai= r split out spinet music racks. Drill out the rack to accept the tuning pin sleeve, epoxy sleeve and hammer= shank in hole and replace music rack. Norm Barrett Memphis Chapter </BLOCKQUOTE> Geannie: Please include this repair in the Tech Tips in the Journal. It is one the <= BR> best ones I have seen come along in a long time. Thanks Norm for including it on the list.   Willem </BLOCKQUOTE> </BODY> </HTML>