<html> <body> Speaking of Clair Davies, have you all heard of his (new?) book? It's called  "The Trigger Point Therapy Workbook" "Your Self-Treatment Guide for Pain Relief" .  I have read only a part of it so far but I can confidently recommend it to everyone without reservation. I'd tell you where you could get your own copy but mine was a gift to me from a fellow sufferer who, it just so happens, isn't even a piano tech. Check it out folks if you'd like to do something about your own aches and pains rather than spending countless dollars to have some health care professional tell you that they can't help you AFTER collecting their fee. Greg Newell At 10:51 PM 10/5/2003, you wrote: <blockquote type=cite class=cite cite>In a message dated 10/5/2003 1:47:46 PM Pacific Daylight Time, draine@comcast.net writes: <dl> <dd>On Sunday, October 5, 2003, at 10:32  AM, Bill Ballard wrote: <dd>> At 11:59 AM +0200 10/5/03, Richard Brekne wrote: <dd>>> Would you be doing your crown readings from on top of the soundboard, <dd>>> or from underneath ? <dd>> <dd>> The underside is where it should be measured. <dd>So can I infer from that statement that all tapering of soundboards is <dd>done on the top surface? <dd>Patrick Draine </dl> Patrick  Yes you've answered the $64.00 question correctly. Well almost. Clair Davies used to do his on the bottom but I don't know why.    Dale --- Checked by AVG anti-virus system (<a href="http://www.grisoft.com/"= eudora="autourl">http://www.grisoft.com</a>). Version: 6.0.521 / Virus Database: 319 - Release Date: 9/23/2003</blockquote> <x-sigsep></x-sigsep> Greg Newell Greg's piano Forté <a href="mailto:gnewell@ameritech.net"= eudora="autourl">mailto:gnewell@ameritech.net</a></body> </html>