<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1515" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face=Arial size=2>Greg asked: "<FONT face="Times New = Roman" size=3>  By "rails" I assume you mean action or key frame rails. = I have not <BR>checked that. I'm not sure what you mean by remounting them. I think = they <BR>sit flat on the keyframe.<BR><BR>regards,<BR>Greg<FONT face=Arial size=2>,</FONT></FONT></FONT></DIV> <DIV><FONT face=Arial size=2>I was referring to the Action Rails. = Many times the Action brackets are "shimmed". If this is the case, it may be possible = to remove some of the shimming from the middle bracket(s) footing and thereby = making the Action Rails "bow" downward enough to get decent clearance. If this is = done, some creative regulation will be needed, but it is doable. = </FONT></DIV> <DIV><FONT face=Arial size=2>The first thing I would do is put a = straight edge on the hammer rail and see if it is straight. Same with the wippen rail.</FONT></DIV> <DIV><FONT face=Arial size=2><BR>Regards,</DIV></FONT> <DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, Tool Police<BR>Squares R I</FONT></DIV></BODY></HTML>