<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1400" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT face=Arial size=2>You purchase JB Weld at auto parts =
supplies.
Bill Peterson</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=wpeterson2@socal.rr.com =
href="mailto:wpeterson2@socal.rr.com">w
peterson</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">Pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, December 25, =
2004 5:28
PM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Steinway =
aggraffes</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>I just ran into a massed up aggrafe =
in a s and
s B. I roughed up the threads with a tap and die, and used =
JB
Weld. It has 2 ton strength and can be drilled etc. They =
use it
for engine block repairs. It is thick and easy to work =
with. It
takes 14 hours to harden completely. </FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>Bill Peterson</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=joegarrett@earthlink.net =
href="mailto:joegarrett@earthlink.net">Joe
Garrett</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Saturday, December 25, =
2004 8:56
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: Steinway =
aggraffes</DIV>
<DIV><BR></DIV>
<DIV><FONT face=Arial size=2>Tom Driscoll mused: "<FONT
face="Times New Roman" size=3> If the replacement agraffe is too =
loose in
this plate,that is threads in<BR>but with out much brass in the =
iron,
could I epoxy or CA the bugger in ?<BR> I'm =
suspecting
that the upward force would make this questionable, and<BR>Joe =
G. will
put up a stink if he's the poor guy who try's to get this =
thing<BR>out, but
your opinions as always appreciated,"<BR>
Tom,</FONT></FONT></DIV>
<DIV>Hey! Lighten up a bit!<G> I've done exactly as you =
propose! It
works and I suspect will not cause any problem in the future. I =
use(d)
"Steel Epoxy".</DIV>
<DIV>Best Regards,</DIV>
<DIV><FONT face=Arial size=2>Joe Garrett, R.P.T.<BR>Captain, =
Tool
Police<BR>Squares R =
I</FONT></DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>