<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1226" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT size=2></FONT><FONT face=Arial>To the 15 minute pitch =
raisers out
there:</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Would this apply to a piano that was, for =
example, 30
cents flat? Do you then, after the one pass pitch raise is =
complete, tune
the piano in one tuning pass? If so, can I assume the quick pitch raise =
got all
strings to within two or so cents of their target? And after all is said =
and
done, does this one pass pitch raise, followed by a one pass tuning =
bring all
strings/notes to within one or two cents of target?</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>I'm not saying any of this is not possible. I =
can't do it
in the times reported on this list. I have a hard time imagining someone =
doing
it. I hope to have the opportunity at a convention sometime to =
witness a
speed demonstration.</FONT></DIV>
<DIV><FONT face=Arial></FONT> </DIV>
<DIV><FONT face=Arial>Terry Farrell</FONT></DIV>
<DIV><FONT face=Arial size=2></FONT> </DIV>
<DIV><FONT face=Arial size=2>----- Original Message ----- </FONT>
<DIV><FONT face=Arial size=2>From: "Brian Lawson" <</FONT><A
href="mailto:lawsonic@bdmail.co.za"><FONT face=Arial
size=2>lawsonic@bdmail.co.za</FONT></A><FONT face=Arial =
size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>To: "Pianotech" <</FONT><A
href="mailto:pianotech@ptg.org"><FONT face=Arial
size=2>pianotech@ptg.org</FONT></A><FONT face=Arial =
size=2>></FONT></DIV>
<DIV><FONT face=Arial size=2>Sent: Friday, October 10, 2003 10:35
AM</FONT></DIV>
<DIV><FONT face=Arial size=2>Subject: Re: Standard =
Pitch</FONT></DIV></DIV>
<DIV><FONT face=Arial><BR><FONT size=2></FONT></FONT></DIV><FONT =
face=Arial
size=2>> Hi,<BR>> <BR>> If you are taking 2 hours for a pitch =
raise
then you are trying for something<BR>> else.<BR>> i.e. you should =
not be
trying to set pins and get perfect unisons<BR>> <BR>> You come to =
a flat
piano - A pitch raise is a sharp, out of tune piano - that<BR>> takes =
15 - 20
mins<BR>> <BR>> <BR>> Brian<BR>> <BR>> <BR>> <BR>> =
-----
Original Message -----<BR>> From: "Joey Recker" <</FONT><A
href="mailto:joey@onkeypianotuning.com"><FONT face=Arial
size=2>joey@onkeypianotuning.com</FONT></A><FONT face=Arial =
size=2>><BR>>
To: "'Pianotech'" <</FONT><A href="mailto:pianotech@ptg.org"><FONT =
face=Arial
size=2>pianotech@ptg.org</FONT></A><FONT face=Arial =
size=2>><BR>> Sent:
Friday, October 10, 2003 3:54 PM<BR>> Subject: RE: Standard =
Pitch<BR>>
<BR>> <BR>> <BR>> <BR>> > Any other slow tuners out
there??<BR>> ><BR>> <BR>> I'm with you brother! After =
reading
this list for a while I'm glad to<BR>> hear someone else is as slow =
as
me! I figure I'm doing something wrong.<BR>> <BR>> <BR>> =
Standard
"fine tuning". I plan for an hour (although I have =
completed<BR>> in 45
minutes).<BR>> Pitch Raise. 2 hours.<BR>> <BR>> <BR>>
_______________________________________________<BR>> pianotech list =
info:
</FONT><A href="https://www.moypiano.com/resources/#archives"><FONT =
face=Arial
size=2>https://www.moypiano.com/resources/#archives</FONT></A><BR><FON=
T
face=Arial size=2>> <BR>>
_______________________________________________<BR>> pianotech list =
info:
</FONT><A href="https://www.moypiano.com/resources/#archives"><FONT =
face=Arial
size=2>https://www.moypiano.com/resources/#archives</FONT></A><BR><FON=
T
face=Arial size=2>> </FONT></BODY></HTML>