<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 2/19/02 1:31:49 AM !!!First Boot!!!, avery@ev1.net writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Hi Wim,
<BR>
<BR>I assume you have to block the bottom of the hole for this to
<BR>work. Not being "smart", just wanting to be sure what you mean!
<BR>
<BR>Avery
<BR>
<BR></BLOCKQUOTE>
<BR>
<BR>Avery
<BR>
<BR>Yes, I shore up the bottom of the pin block. I wedge a piece of plywood, covered with felt, on which I put a piece of wax paper. The felt is there to be sure all the little gaps and curves are covered. The wax paper is there to keep the epoxy from sticking to the felt.
<BR>
<BR>Wim</FONT></HTML>