<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2314.1000" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV><FONT size=2>Hi list,</FONT></DIV>
<DIV><FONT size=2>A customer of mine has a Heintzman & Co. =
console, made in
Toronto. The pin block is pulling away from the back frame and I =
received
the go ahead for the repair. My problem is the bolts going through =
the
plate into the block and back frame are Thompson bolts ( square recess =
in head
of bolt) and I can't find any supplier in the U.S. with this large of =
Thompson
driver. The plate bolts have a square recess of 3/16" square or =
roughly
5mm. I wouldn't mind being a set of Thompson drive sockets so I =
can
tighten up a few other things on this piano. Any suggestion for =
tool
suppliers from are Canadian list members? </FONT></DIV>
<DIV><FONT size=2>Thanks</FONT></DIV>
<DIV><FONT size=2>Doug Mahard, Associate</FONT></DIV></BODY></HTML>