<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=iso-8859-1">
<META content="MSHTML 6.00.2800.1106" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY>
<DIV><FONT color=#008000>A man after my epoxy reinforced heart! Please =
explain
the items below:</FONT></DIV>
<DIV> <SPAN id=__#Ath#SignaturePos__></SPAN> </DIV>
<DIV>----- Original Message -----
<DIV>From: "Bill Ballard" <<A
href="mailto:yardbird@vermontel.net">yardbird@vermontel.net</A>></DI=
V>
<DIV>To: <<A =
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A>></DIV>
<DIV>Sent: Saturday, March 29, 2003 12:03 AM</DIV>
<DIV>Subject: Epoxy Reinforcing of Action Parts</DIV></DIV>
<DIV><BR></DIV>
<DIV>> Dear List,<BR>> <BR>> i'm working on a 1906 Krakauer =
5'10"
grand, restringing with original <BR>> board and block, new shanks =
and
hammers, and lots of <BR>> refurbish-whatevering in the action. New =
shanks
were a must because <BR>> the wood was fracturing right at the =
bushings (must
be reed maple, or <BR>> a let-off rail problem. But I stayed with the =
original reps.<BR>> <BR>> It turns out all action parts or what =
looks like
American Beech, <BR>> which after nearly 100 years is quite brittle. =
(That's
why the <BR>> fractured shanks.) The reps did better, although the =
week spot
is the <BR>> joint between the jack fly and tender.</DIV>
<DIV> </DIV>
<DIV><FONT color=#008000>What is the "jack fly"? I imagine the =
"tender" is the
foot part?</FONT></DIV>
<DIV> </DIV>
<DIV>> I fond out quickly that I <BR>> wasn't going to be able to =
cradle
the jacks the usual was. </DIV>
<DIV> </DIV>
<DIV><FONT color=#008000>Please explain "cradle the jacks" - I am not =
familiar
with this term.</FONT></DIV>
<DIV> </DIV>
<DIV>> The back <BR>> of the jacks shear off through the CP hole. =
</DIV>
<DIV> </DIV>
<DIV><FONT color=#008000>Can you clarify this at all - can't quite
picture?</FONT></DIV>
<DIV> </DIV>
<DIV>> Bending the pin and <BR>> rotating it to vertical isn't =
going to
work. (The bent pin puts a <BR>> gouging stress on the bushing, and =
shows no
sign of ever loosening to <BR>> proper friction. Also the orientation =
of the
pin appears not to be <BR>> stable.)</DIV>
<DIV> </DIV>
<DIV><FONT color=#008000>Again, please explain/clarify. Why are =
you bending
pins? What pin - center pin? Rotating to vertical? I don't have a clue =
as to
what you are describing.</FONT><BR> <BR>> But there are =
jacks which
will need cradle, and no matter how low I <BR>> set the psi on the =
air
nailer, the jacks fracture when I tap them to <BR>> cradle them. =
</DIV>
<DIV> </DIV>
<DIV><FONT color=#008000>Air nailer? To "cradle" a jack? What is this =
process?
Please describe in detail.</FONT></DIV>
<DIV> </DIV>
<DIV>> So my next best guess is to impregnate the beech at the =
<BR>>
jack's elbow. That should render the jacks strong enough to take a =
<BR>>
cradling tap.<BR></DIV>
<DIV><FONT color=#008000>You can put epoxy between wooden parts. You =
can add
epoxy to the exterior of parts. You can "impregnate" a material with =
thin epoxy
if it is quite porous. Beech is pretty darn dense stuff. You will not be =
able to
"impregnate" beech with epoxy.</FONT></DIV>
<DIV><FONT color=#008000></FONT> </DIV>
<DIV><FONT color=#008000>I'm very curious about the questions above. I =
look
forward to your descriptions.</FONT></DIV>
<DIV><FONT color=#008000></FONT> </DIV>
<DIV><FONT color=#008000>Terry Farrell</FONT></DIV>
<DIV> <BR>> Does anybody know how to do this? It's going to be a =
great
piano. <BR>> I've promised to get it back to the church for
Easter.<BR>> <BR>> Bill Ballard RPT<BR>> NH Chapter, =
P.T.G.<BR>>
<BR>> "Lady, this piano is what it is, I am what I am, and you are =
what you
are"<BR>> ...........From a recurring
nightmare.<BR>> +++++++++++++++++++++<BR>>
_______________________________________________<BR>> pianotech list =
info: <A
href="https://www.moypiano.com/resources/#archives">http://www.ptg.org=
/mailman/listinfo/pianotech</A></DIV></BODY></HTML>