<HTML><FONT FACE=arial,helvetica><FONT SIZE=2>In a message dated 1/18/02 3:33:08 AM !!!First Boot!!!, Bigeartb@AOL.COM writes:
<BR>
<BR>
<BR><BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">Wilem:
<BR>Thank you . I strongly suspected I needed to reinforce the keybed but had
<BR>never faced this problem on any other instrument. I needed asssurance. I hope
<BR>this list appreciates your wisdom as much as I do. Thank you!!!!!!!! I'm not
<BR>real sure of the size of angle Iron but I have some engineering buddies that
<BR>maybe can help. I'll use a big ole piece.
<BR>
<BR>
<BR>Tommy Black
<BR>Decatur, Ala.
<BR></BLOCKQUOTE>
<BR>
<BR>Tommy
<BR>
<BR>If I remember, (this was about 20 years ago), I bought the piece I needed at the hardware store. If you've got a Home Depot or Lowes near you, give them a try. It only needs to be 4 feet long.
<BR>
<BR>Wim </FONT></HTML>