<!doctype html public "-//w3c//dtd html 4.0 transitional//en">
<html>
<body bgcolor="#FFFFFF">
Well... outside of getting a set of different pitched A forks... I suppose
you could simply use your ears to offset for bps. 2bps up from 440 would
give you 442 and so on. You'd probably have to accept a certain margin
for error but I suppose with practice you would get real good at this.
Paul wrote:
<blockquote TYPE=CITE><style></style>
<font face="Arial"><font size=-1>List</font></font><font face="Arial"><font size=-1>All
this about A being other than 440. How does a tuning fork user set something
other than A440, such as 442 or 444? I can't help but feel there many tuners
out there like me that use a fork only to determine A440 and have little
if any knowledge of how to "adjust" for another Hz. Fortunately, I have
never been asked to tune A to anything but 440. But, my curiosity makes
me ask how this done WITHOUT an ETD. I'll park my but(t) and wait for the
answers.</font></font> <font face="Arial"><font size=-1>Paul Chick</font></font></blockquote>
<p>--
<br>Richard Brekne
<br>RPT, N.P.T.F.
<br>Bergen, Norway
<br><A HREF="mailto:Richard.Brekne@grieg.uib.no">mailto:Richard.Brekne@grieg.uib.no</A>
<br>
</body>
</html>