<html>
Dave,<br>
<x-tab> </x-tab>What am I
missing here? Is this not, as other sling hygrometers, measuring the air
and not the board? Isn't Terry trying to judge the moisture content of
the board and not necessarily the air around it?<br><br>
Greg Newell<br><br>
<br>
At 10:05 AM 8/30/2002, you wrote:<br>
<blockquote type=cite class=cite cite>Terry:<br>
<br>
I have an Amprob THWD-1 that I've used for several years. I got it
for about $105.00 from a local industrial supply co. Since I'm not
cooking sounding boards I've found it to be quite good. Check it
out.<br>
<br>
<a href="http://www.testmart.com/advice/advicetmp.cfm/v/001~~%2E%2E%2Fsearch%2Farchivespec%2Ecfm~~TEMP~~AMPROB~~THWD%2D1~~%20~~%20%7C1.html">http://www.testmart.com/advice/advicetmp.cfm/v/001~~%2E%2E%2Fsearch%2Farchivespec%2Ecfm~~TEMP~~AMPROB~~THWD%2D1~~%20~~%20%7C1.html</a><br>
<br>
dave<br><br>
<pre>
_____________________________
David M. Porritt
dporritt@mail.smu.edu
Meadows School of the Arts
Southern Methodist University
Dallas, TX 75275
_____________________________</pre><font face="Courier New, Courier"></blockquote>
<x-sigsep><p></x-sigsep>
Greg Newell<br>
<a href="mailto:gnewell@ameritech.net" eudora="autourl">mailto:gnewell@ameritech.net</a></font></html>