<HTML>In a message dated 4/10/02 11:28:29 AM Central Daylight Time, Richard.Brekne@grieg.uib.no writes: <BLOCKQUOTE TYPE=CITE style="BORDER-LEFT: #0000ff 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: 0px; PADDING-LEFT: 5px">--Hammers and shanks have been changed at some point, --regulates at present with drop screws way up... have had to grind several in order to keep from breaking them on the underside of the pin block. --Letoff button has plenty of room to go up, but its on the high side. --a 90 degree rake and shank parallel to strings would necessitate shortning the borelength... hmmmm. --present rake is 90 degrees, borelengths of 56 / 63 So.... grin... Name That Problem !! :) -- Richard Brekne </BLOCKQUOTE> Glide bolts are up to high. Wim </HTML>