<!doctype html public "-//W3C//DTD W3 HTML//EN"> <html><head><style type="text/css"></style><title>Re: Reinstalling action stack?</title></head><body> <div>At 12:07 PM -0500 5/27/03, Cy Shuster wrote:</div> <blockquote type="cite" cite><font size="-1">... there was a comment that the action should be reinstalled with the screws to the top of the stack loosened, to be tightened after the action's back in place, seated on the keybed.</font></blockquote> <blockquote type="cite" cite> ...<font size="-1"> Should I follow this same procedure when I reinstall the stack?</font></blockquote> <div><br></div> <div>I remember reading that and was puzzled myself for doing such a thing at all. Perhaps whoever wrote that could repost their reasons for saying such a thing.</div> <div><br></div> <div>As far as I am concerned, there is no reason to leave the screws loose, sake for having to take the time to tighten them, then undo them again to remove the action stack to reinstall the keys.</div> <div><br></div> <div>If necessary, shimming the feet of the action brackets where there is obvious space would take place at this time before securing the screws, that is of course, only if one deems that an important part of the bedding process as I do.</div> <div><br></div> <div>Keith McGavern</div> </body> </html>