<html> Hi David,                  that was 2yrs ago, how time flies.  ( tepus fugit ) But I think it is on the Journal disc. Roger At 11:37 PM 8/22/02 -0700, you wrote: <blockquote type=cite class=cite cite><blockquote type=cite class=cite cite>Roger, You had an article on steaming in a recent Journal, right?  I'm considering trying it on a 1  year old Yamaha G2 that has already begun breaking strings in the treble....hotel lounge with big bands and probably no monitor for the piano... David I.     ----- Original message ----------------------------------------> From: jolly roger <<a href="mailto:baldyam@sk.sympatico.ca">baldyam@sk.sympatico.ca</a>> To: <<a href="mailto:pianotech@ptg.org">pianotech@ptg.org</a>> Received: Fri, 23 Aug 2002 00:28:02 -0500 Subject: Re: Singing Samick 3. Anything else to try? (Bridge and everything else 'looks' fine.) Alan Barnard</blockquote> Hi Alan,               Try tapping the bridge pins, they are probably are probably loose. Use a hammer shank or a pin set punch, just be careful with the hammer. The rock hard hammers need deep needling on the shoulders, or a generous dose of steam. if you are inexperienced at voicing, find some one to help you. Regards Roger</blockquote> </html>