<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; = charset=iso-8859-1"> <META content="MSHTML 6.00.2800.1400" name=GENERATOR> <STYLE></STYLE> </HEAD> <BODY bgColor=#ffffff> <DIV><FONT face="Comic Sans MS" color=#000080 = size=2>Joe:</FONT></DIV> <DIV><FONT face="Comic Sans MS" color=#000080 = size=2></FONT> </DIV> <DIV><FONT face="Comic Sans MS" color=#000080 size=2>Have you = tried using heat with these older keytops?  You might just give it a shot with a = couple and see how it works.  I've actually had pretty good luck with a dry = iron, watched very carefully.  (I've only started one small fire, early = in my career, while I was still figuring this out.)  If you watch it = carefully, keep checking and prying with a knife, you can figure out what the = optimal time of heating is for slicing or pulling it off without pulling off excess = wood or melting it so it becomes unworkable.</FONT></DIV> <DIV><FONT face="Comic Sans MS" color=#000080 = size=2></FONT> </DIV> <DIV><FONT face="Comic Sans MS" color=#000080 size=2>Randy = Rush</FONT></DIV> <DIV><FONT face="Comic Sans MS" color=#000080 = size=2></FONT> </DIV> <DIV><FONT face="Comic Sans MS" color=#000080 size=2>><FONT = color=#000000 size=3>The usual "glue" that was used to attach celluloid was some = sort of MEK<BR>based stuff that, in and of itself, is very flammable. The = celluloid is<BR>flammable. So...., heat is not really an option and IMHO only = makes the<BR>celluloid soft, but doesn't really break down the bond of the "adhesive".<BR></DIV></FONT></FONT></BODY></HTML>