<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META content="text/html; charset=iso-8859-1" =
http-equiv=Content-Type>
<META content="MSHTML 5.00.2614.3500" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>&nbsp;</DIV>
<BLOCKQUOTE
style="BORDER-LEFT: #000000 2px solid; MARGIN-LEFT: 5px; MARGIN-RIGHT: =
0px; PADDING-LEFT: 5px; PADDING-RIGHT: 0px">
  <DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
  <DIV
  style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
  <A href="mailto:HazenBannister@cs.com"
  title=HazenBannister@cs.com>HazenBannister@cs.com</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>To:</B> <A =
href="mailto:pianotech@ptg.org"
  title=pianotech@ptg.org>pianotech@ptg.org</A> </DIV>
  <DIV style="FONT: 10pt arial"><B>Sent:</B> Thursday, June 06, 2002 =
7:55
  PM</DIV>
  <DIV style="FONT: 10pt arial"><B>Subject:</B> Broken string =
repair</DIV>
  <DIV><BR></DIV>
  <DIV><FONT face=arial,helvetica><FONT size=2>List, <BR>&nbsp;I had =
a string
  break yesterday on a spinet,during a pitch raise.It was the last wound =
string
  on the treble side.I spliced the string with no problem,and could not =
get it
  under the pressure bar,without it going under the felt.I =
twisted,bent,tried
  different angles,everything with no luck.So I cut the felt,pulled the =
wire on
  top,and pushed the felt back together,and pulled it up to pitch.Does =
anyone
  have a trick for this problem? <BR>Thanks in advance, <BR>Hazen
  Bannister</FONT></FONT></DIV>
  <DIV><FONT face=arial,helvetica><FONT =
size=2></FONT></FONT>&nbsp;</DIV>
  <DIV><FONT face=arial,helvetica><FONT size=2>Get some small =
diameter metal
  tubing (empty ballpoint pen refill) and bend it in the shape of a =
question
  mark.&nbsp; It might kink a little but doesn't matter -- only the end =
half
  inch or so needs to be open.&nbsp; Insert the curved part behind
  the&nbsp;pressure bar from above, poke the piano wire into the tubing, =
then
  push it upwards until it's threaded thru.&nbsp; One of the first =
homemade
  tools I ever made and I'm still using the same one 22 years
  later.&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; --David Nereson, RPT,
  Denver&nbsp;&nbsp;</FONT> </FONT></DIV></BLOCKQUOTE></BODY></HTML>