<html>
<font size=3>At 05:53 PM 10/16/2001 -0400, you wrote:<br>
<blockquote type=cite cite> I also don't understand why
adding a strip of sandpaper, felt, or whatever <br>
to the rail, is supposed to move the hammers to the right. This would
affect <br>
all sides of the flange equally, no? </font></blockquote><br>
Adding a strip of abrasive paper to the rail would allow the flange to be
secured in a position<br>
other than where it 'wants' to be due to the profile of the
molding.<br>
<br>
The problem would not be present if it were not for those accursed
Tubular Action Rails.<br>
<br>
Tradition is a terible thing to waste,<br>
<font size=3><br>
Regards,<br>
<br>
Jon Page, piano technician<br>
Harwich Port, Cape Cod, Mass.<br>
<a href="mailto:jonpage2001@mediaone.net" eudora="autourl">mailto:jonpage2001@mediaone.net</a><br>
<a href="http://www.stanwoodpiano.com/" eudora="autourl">http://www.stanwoodpiano.com</a><br>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~</font></html>