<html>  <head></head> <body>  <DIV></DIV> <P>Thanks Terry,</P> <P>Actually, I did not want to pull the action on this turkey. I was toying with the idea of installing springs on a thin strip of wood and then glueing it in place.<BR></P> <BLOCKQUOTE style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">-------------- Original message from "Farrell" <mfarrel2@tampabay.rr.com>: -------------- <BR><BR> <META content="MSHTML 6.00.2900.2668" name=GENERATOR> <STYLE></STYLE> <DIV><FONT face=Arial>Alan, that was cruel and uncalled for. Whitney, like all piano manufacturers space the butt springs one per butt! (It's the butts that are randomly spaced!)   ;-)</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>That's all you get Rick until you give us more information! R U replacing the spring rail for some reason? Or just the springs. Perhaps this is the first time you have replaced this type of spring? If so, you may just not be aware that the springs are set into little holes in the spring rail - so no spacing efforts are needed - just remove old springs and replace with new ones in original holes. (You need to soak the felt to soften and remove the hide glue...... oh no - was a Whitney glued up with hide glue or will it be some ookey white crud.....?????)</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>No doubt there is tons of info in the archives describing this job. I know there is good stuff in the PTG reprint articles - that's what I used the first time I did that job.</FONT></DIV> <DIV><FONT face=Arial></FONT> </DIV> <DIV><FONT face=Arial>Terry Farrell</FONT></DIV> <BLOCKQUOTE dir=ltr style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px"> <DIV style="FONT: 10pt arial"> </DIV> <DIV> <DIV>Whitney spinet, eh? Just use the same random spacing the factory used.... oh, wait, that was cruel.</DIV> <DIV> </DIV> <DIV>More seriously: Are these on a damper rebound rail in the usual configuration? Is the rail still usable?</DIV> <DIV> </DIV> <DIV>Actually, I guess I don't really understand your question ... a little more detail, please ...</DIV> <DIV> </DIV> <DIV> <DIV>Alan Barnard</DIV> <DIV>Salem, Missouri</DIV> <DIV><FONT face=Arial></FONT> </DIV></DIV></DIV> <BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid"><FONT size=2> <DIV> Is there a standard distance for spacing hammer butt springs? I'm thinking of doing a gang replacement on a Whitney spinet .</DIV> <DIV> </DIV> <DIV>Thanks,</DIV> <DIV>Rick Ucci/Ucci Piano</DIV></FONT></BLOCKQUOTE></BLOCKQUOTE></BLOCKQUOTE>  </body> </html>