<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=Content-Type content="text/html; =
charset=windows-1252">
<META content="MSHTML 5.50.4522.1800" name=GENERATOR>
<STYLE></STYLE>
</HEAD>
<BODY bgColor=#ffffff>
<DIV>I have never done such an installation. If one finds humidity =
related
troubles with keys/action, I would consider placing a low-wattage rod =
under the
keybed first. If that did not adequately address an action-humidity =
problem I
would then try a low-wattage rod right in front of the action stack. =
This rod
would have its own humidistat installed within the action cavity.</DIV>
<DIV> </DIV>
<DIV>I have a hard time imagining conditions where any of this would be
necessary, but if such conditions existed, I would start out slow =
and
monitor closely.</DIV>
<DIV> <SPAN id=__#Ath#SignaturePos__></SPAN> </DIV>
<DIV>Terry Farrell</DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=davidlovepianos@earthlink.net
href="mailto:davidlovepianos@earthlink.net">David Love</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> Friday, February 01, 2002 =
10:50
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: =
Dampp-Chaser.</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2>Is it wise to put a DC inside the action =
cavity right
under the pin block? I would think it isn't.</FONT></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV><FONT size=2>David Love</FONT></DIV>
<BLOCKQUOTE dir=ltr
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; =
BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px">
<DIV style="FONT: 10pt arial">----- Original Message ----- </DIV>
<DIV
style="BACKGROUND: #e4e4e4; FONT: 10pt arial; font-color: =
black"><B>From:</B>
<A title=mfarrel2@tampabay.rr.com
href="mailto:mfarrel2@tampabay.rr.com">Farrell</A> </DIV>
<DIV style="FONT: 10pt arial"><B>To:</B> <A =
title=pianotech@ptg.org
href="mailto:pianotech@ptg.org">pianotech@ptg.org</A> </DIV>
<DIV style="FONT: 10pt arial"><B>Sent:</B> February 01, 2002 7:45 =
AM</DIV>
<DIV style="FONT: 10pt arial"><B>Subject:</B> Re: =
Dampp-Chaser.</DIV>
<DIV><BR></DIV>
<DIV><FONT size=2></FONT> </DIV>
<DIV>If it is really humid down there, and you have action/key =
problems that
are related to humidity, you might want to consider a separate =
system for
inside the action and/or under the keybed
-</DIV></BLOCKQUOTE></BLOCKQUOTE></BODY></HTML>